Bimodal waveguide interferometer RI sensor fabricated on low-cost polymer platform

A refractive index sensor based on bimodal waveguide interferometer is demonstrated on the low-cost polymer platform for the first time. Different from conventional interferometers which make use of the interference between the light from two arms, bimodal waveguide interferometers utilize the interference between the two different internal modes in the waveguide. Since the utilized first higher mode has a wide evanescent tail which interacts with the external environment, the interferometer can reach a high sensitivity. Instead of vertical bimodal structure which is normally employed, the lateral bimodal waveguide is adopted in order to simplify the fabrication process. A unique offset between the centers of single mode waveguide and bimodal waveguide is designed to excite the two different modes with equal power which contributes to the maximum fringe visibility. The bimodal waveguide interferometer is finally fabricated on optical polymer (Ormocore) which is transparent at both infrared and visible wavelengths. It is fabricated using the UV-based soft imprint technique which is simple and reproductive. The bulk sensitivity of fabricated interferometer sensor with a 5 mm sensing length is characterized using different mass concentration sodium chloride solutions. The sensitivity is obtained as 316 pi rad/RIU and the extinction ratio can reach 18 dB

Investigation of grating-assisted trimodal interferometer biosensors based on a polymer platform

A grating-assisted trimodal interferometer biosensor is proposed and numerically analyzed. A long period grating coupler, for adjusting the power between the fundamental mode and the second higher order mode, is investigated, and is shown to act as a conventional directional coupler for adjusting the power between the two arms. The trimodal interferometer can achieve maximal fringe visibility when the powers of the two modes are adjusted to the same value by the grating coupler, which means that a better limit of detection can be expected. In addition, the second higher order mode typically has a larger evanescent tail than the first higher order mode in bimodal interferometers, resulting in a higher sensitivity of the trimodal interferometer. The influence of fabrication tolerances on the performance of the designed interferometer is also investigated. The power difference between the two modes shows inertia to the fill factor of the grating, but high sensitivity to the modulation depth. Finally, a 2050 2π/RIU (refractive index unit) sensitivity and 43 dB extinction ratio of the output power are achieved

Degradation Modeling and RUL Prediction Using Wiener Process Subject to Multiple Change Points and Unit Heterogeneity

Degradation modeling is critical for health condition monitoring and remaining useful life prediction (RUL). The prognostic accuracy highly depends on the capability of modeling the evolution of degradation signals. In many practical applications, however, the degradation signals show multiple phases, where the conventional degradation models are often inadequate. To better characterize the degradation signals of multiple-phase characteristics, we propose a multiple change-point Wiener process as a degradation model. To take into account the between-unit heterogeneity, a fully Bayesian approach is developed where all model parameters are assumed random. At the offline stage, an empirical two-stage process is proposed for model estimation, and a cross-validation approach is adopted for model selection. At the online stage, an exact recursive model updating algorithm is developed for online individual model estimation, and an effective Monte Carlo simulation approach is proposed for RUL prediction. The effectiveness of the proposed method is demonstrated through thorough simulation studies and real case study

Clinical Retrospective Study of Pterygomaxillary Implant Combined with Anterior Implant in the Repair of Atrophic Edentulous Maxilla

Objective: To retrospectively analyze the therapeutic effect of pterygomaxillary implant combined with anterior implant in the repair of atrophic maxillary edentulous jaw. Methods: The clinical data of 26 patients with atrophic edentulous maxilla who received pterygomaxillary implants combined with anterior implants from January 2019 to December 2020 were analyzed retrospectively. All patients were followed up for ≥ 1 year. The retention of anterior implants (105) and pterygomaxillary implants (45) were compared Patients' satisfaction with deep and middle periodontal examination (MBPD) and plaque (PLI). Results: The anterior implant retention rate was 97.14%, which was close to 93.33% in pterygomaxillary area (P > 0.05);The levels of PD, PLI, mesial MBL and distal MBL of anterior implants were similar to those of pterygomaxillary implants (P > 0.05); Patients' satisfaction with treatment was 92.31%. Conclusion: In the treatment of patients with posterior atrophic edentulous maxilla, the pterygomaxillary implant and the anterior implant supported complete arch fixed denture can bear the weight immediately, the short-term clinical effect is acceptable, and the patient satisfaction is high. It is a predictable and feasible repair method

Optical observations of a SN 2002cx-like peculiar supernova SN 2013en in UGC 11369

We present optical observations of a SN 2002cx-like supernova SN 2013en in UGC 11369, spanning from a phase near maximum light (t= +1 d) to t= +60 d with respect to the R-band maximum. Adopting a distance modulus of mu=34.11 +/- 0.15 mag and a total extinction (host galaxy+Milky Way) of $A_V \sim1.5$ mag, we found that SN 2013en peaked at $M(R)\sim -18.6$ mag, which is underluminous compared to the normal SNe Ia. The near maximum spectra show lines of Si II, Fe II, Fe III, Cr II, Ca II and other intermediate-mass and iron group elements which all have lower expansion velocities (i.e., ~ 6000 km/s). The photometric and spectroscopic evolution of SN 2013en is remarkably similar to those of SN 2002cx and SN 2005hk, suggesting that they are likely to be generated from a similar progenitor scenario or explosion mechanism.Comment: 8 pages, 8 figures, 3 tables, accepted for publication in MNRA